Variable Mods

A variety of variable voltage/wattage mods.

Position
Set Descending Direction

List Grid

10 per page

Items 1 to 10 of 31 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. IPV4s by Pioneer4You

    $99.99
    IPV4s Mod Features Include: Built by Green Leaf/Pioneer4You. IPV4s mod, the newest revision of the IPV family of mods. Yihi chip – SX330 V4S. Reads temperature in Joules! Resistance reads down to 0.1 Ω. Resistance reads up to 3.0 Ω. Adjustable wattage: 5W-120W. Output voltage: 1.0V – 7.5V. Takes 2 18650 Batteries (batteries are not included). Pass through mode is supported. Fully magnetic battery cover, no screws necessary! Auto ohm resistance meter finds ideal voltage for tank/dripper. Voltage is calculated automatically as wattage is adjusted. Wattage regulated via two buttons, -/+. The IPV4s Mod Mini USB interface charging port. Limited warranty issued by ASMODUS – a USA service center. Aluminum alloy case with rubber battery cover. Advanced LED interface screen. Spring-loaded self-adjusting 510 pin. Comes with Mini USB cable for firmware update. Learn More
  2. asMODus Minikin V2 180W

    $89.99

    Special Price $69.99

    The Minikin v2 180W Touch Screen Box Mod by Asmodus is powered by a GX-180-HT chip which incorporates the same battery power saving capabilities as its predecessors, but now features a new wattage cap of 180W and touch screen support! The Minikin v2 utilizes newly updated firmware which displays the following information on its LED screen: individual battery charge, atomizer resistance, voltage being used to fire at desired wattage, puff counter, duration of fire, and current mode selected. In addition, the Minikin v2 features a redesigned body that was designed to be exceptionally ergonomic. The asMODus logo has been re-positioned to the back of the device and the USB port has been moved to the front of the device as the battery door has been remodeled to add magnetic closure. Unlock Screen: Simply sliding your finger down the screen. Touching the wattage will allow you to change the wattage using the "+" and "-" buttons that appear on the screen. Pressing the fire button will set the wattage and take you back to the main screen. The menu of the device is accessed by pressing the firing mode when the screen is unlocked. Within the menu you can check the resistance, select a mode, and enter set up. Checking Resistance (TC Mode ONLY): Clicking the "Res" button in the main menu navigates you to the resistance menu. You will see "Set Res" and on the top and bottom you will see a "CHECK" button. Pressing the "CHECK" button will give you a resistance and "YES" and "NO" buttons will appear. Pressing "YES" will take you back to the main menu with your resistance set. Pressing "NO" will cause "+" and "-" buttons to appear which allow you to manually change your resistance. Mode Selection: In the main menu, the second option found is called "Mode". By pressing "Mode" you will enter a mode selection menu that allows you to choose which mode to fire the device in. You will see "PWR" which is your standard variable wattage mode and within that mode you will see two different options: "W" Power which is wattage mode, and a new mode called "Curve". "Curve" is a unique firing mode within traditional power mode that manually imitates the abilities of temperature control by setting 5 different wattage over time presets. For example you can set the device to fire at 80W for 0.5 seconds then 90W for 0.5 seconds then 75W for 0.5 seconds (for up to 5 different presets). Doing this will run through your presets in a cycle for an extremely fine tuned vaping experience. Wattage in "Curve" can be adjusted in 0.1 watt increments and seconds can be adjusted in .1 increments. The other options found in the mode selection screen are "Coil" which is used to select the type of wire you are using (supports Ni200, SS316, SS317, and Ti), "TCR" and "TFR" modes. Using Set Up: The last option in the main menu is called "Set Up". In the "Set Up" menu you will see three different pictures. The first (light) controls the screen's brightness. The screen can be adjusted on a scale of 1 - 10 based on user preference. The second (sheet of paper) is used to set a puff limit. This sets a maximum number of puffs that can be taken if you are trying to limit and monitor the amount that you vape. If you try to fire the device and have exceeded your maximum puffs, a warning symbol along with the text of "PUFF LIMIT" will display on the screen and the device will not fire. Setting the limit to 0000 will not set a maximum number of puffs but will still record the amount of puffs taken. The third (trash can) clears your puffs so can have a fresh gauge of how much the device is being used. Features: Powered By Two High Amp 18650 Batteries (Sold Separately) GX-180-HT Chip Output Modes: PWR / Curve / Ni200 / SS316 / SS317 / Ti / TCR / TFR PWR Wattage Range: 5W - 180W TC Wattage Range: 5W - 120W Resistance Range: 0.1Ω - 2.5Ω Temperature Range: 100°C - 300°C / 212°F - 572°F Max Voltage Output: 7.5V Peek Current Output: 45A Touch Screen Hyper Energy Saving Capability Prolongs Battery Life By Approximately 15%-30% Micro USB Charging Capability (DC 5V / 1A) Firmware Upgradeable Includes: 1x Minikin v2 180W Touch Screen Box Mod by Asmodus 1x Micro USB Cord Learn More
  3. Kangertech Cupti 2 Kit

    $74.99
    Kanger CUPTI 2 All-in-One Starter Kit The Kanger CUPTI 2 is an All-In-One device similar to the Aspire Plato and Kanger NEBOX that is designed for both mouth to lung and direct lung vapers. The Kanger CUPTI 2 features a large 5.0ml built-in tank that utilizes the acclaimed leak resistant cup design to help minimize leaks. The Kanger CUPTI 2 can fire up to 80 watts and supports Nickel 200, Titanium and Stainless Steel atomizers in temperature control mode. The Kangertech CUPTI 2 supports the CLOCC atomizer heads and includes (1) SS316L 0.5ohm atomizer head for direct lung users. The Kanger CUPTI also features an adjustable airflow valve located right under the mouth piece for maximum airflow. The included 510 tank adapter allows you to use your favorite tank or dripper with the CUPTI 2. The Kanger CUPTI requires (2) high amp 18650 batteries (sold separately) and is easily replaced using the bottom battery door which is easily locked and unlocked. The CUPTI 2 has a micro USB port for charging and future firmware updates. All you require is batteries and e-Liquid and you are ready to start vaping! Features and Specs: Dimensions: 4-1/8" x 2" x 1-5/8" All in One Design Includes 510 Tank Adapter Temperature Control for Nickel 200, Titanium and Stainless Steel 5.0ml Capacity Operating Wattage: 5.0 - 80.0 W Temperature Range: 100 - 315C / 200-600F Resistance Range: 0.1 - 2.5ohm Top Adjustable Airflow Valve Leak Resistant Cup Design OLED Display Screen Durable Surface Finish Zinc and Aluminum Alloy Construction 510 Drip Tip Compatible Micro USB Charging Port Firmware Upgradeable Utilizes (2) High Amp 18650 Batteries (Sold Separately) Utilizes Kanger CLOCC Atomizer Heads Includes 1 x CLOCC SUS316L 0.5ohm Atomizer Head (Pre-Installed) for Direct Lung Users Supports Optional CLRBA Rebuildable Atomizer (Sold Separately) Learn More
  4. Sigelei Fuchai 213 Mini 80W TC Box Mod

    $74.99
    The Sigelei Fuchai 213 Mini 80W TC Box Mod is specifically designed for portability, retaining the vintage chassis of the Fuchai 213 series while featuring a maximum wattage output of 80W and comprehensive temperature control settings. Paying homage to the ergonomic core of the Fuchai 213, the Fuchai 213W Mini is the most compact structure of the series, measuring 79mm by 37mm by 28.5mm. The miniaturized version maintains a polished modern design with a soft curvature while offering a durable aluminum alloy and zinc alloy construction. Powered by a single 18650 high-drain battery (sold separately), the Fuchai 213W Mini implements the signature hinged battery cover for simple battery adjustments. The 0.91 Inch OLED screen features a wide display matrix, providing a full amount of operational data at a glance, working in synergy with the two adjustment buttons placed adjacent to the display for premier operational usage. The Fuchai 213 Mini integrates Sigelei's latest small form factor chipset, with an output range of 5 to 80W and full temperature control capability with native support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. A perfect solution for portability while offering rangy performance capability for a compact device, the Sigelei Fuchai 213 Mini 80W TC Box Mod is the premier carry device in the industry. Sigelei Fuchai 213W Mini TC Box Mod Features: Single 18650 High-Amp Battery - Not Included Wattage Ouput Range: 10-80W Voltage Output Range: 1-7.5V Output Max Current: 30A Intuitive 0.91 Inch OLED Display High Quality Alluminum Alloy Construction Contrasting Colorway Trim Power Up Functionality Ni200, Titanium, and Stainless Steel Compatibility Temperature Coefficient of Resistance (TCR) Adjustments Three-Button Operation Magnetized Pop-Up Battery Door MicroUSB Port Spring-Loaded 510 Connection Learn More
  5. Sigelei KAOS Spectrum 230W TC Box Mod

    $69.99
    The Sigelei KAOS Spectrum 230W TC Box Mod is the evolutionary in output technology by Sigelei, presenting a beautiful 6-Color LED highlighting chassis with comprehensive chipset for high-power configurations. Learn More
  6. Sigelei Fuchai Duo-3 2 Cover Version TC Mod

    $69.99
    The Sigelei Fuchai Duo-3 TC Mod features the unique ability to choose from a dual or triple 18650 battery configuration with a simple swap of the battery cover. Choose from a powerful maximum wattage of 255 watts with the triple battery configuration or with a more lightweight and portable setup with the dual battery configuration which has a maximum wattage of 175 watts. Learn More
  7. Voopoo Alpha

    $84.99
    VooPoo Alpha One 222W TC Gene Chip Box Mod Learn More
  8. Therion DNA75 TC Box Mod

    $129.99
    The Lost Vape Therion DNA75 TC Box Mod utilizes Evolv's DNA75 integrated system, combining an ergonomic portable form factor with beautiful genuine leather wrapped battery cover and stunning wood panels for a beautifully machined chassis. Learn More
  9. asMODus Ohmsmium 80W TC

    $69.99
    The Ohmsmium, powered by the GX-80-f Chip, is a new box mod that is built with a max of 80 watts in power mode, accurate temperature control, a vibrant solid color design, as well as an ergonomic chassis. The GX-80-f is granted "favorite taste" functionality which boosts the flavor of whatever atomizer is used on this device/ This box mod is made from zinc alloy and stainless steel and features a solid and durable body construction. It is a small mod that features a curved, radiant design to make it comfortable to hold. The Ohmsmium is finished with a unique, vivid coloration to make each unit stand out and will be available in a wide range of colors (colors soon to be announced). At the top of the device, the threaded connection is spring-loaded to easily attach any 510 compatible atomizer. The pin is gold plated to ensure the best conductivity. On the control face, you’ll find a large stainless steel fire button and adjustment buttons as well as a USB port. There’s also a bright OLED screen which displays all the mod’s current information including resistance, voltage, battery percentage, wattage/temperature, mode and puff time. The Ohmsmium is built with a GX-80-f chip which grants temperature control functionality from 200°F to 600°F. The GX80 features five different working modes: Bypass, power and three variable temperature control modes. Temperature Control mode can be used with Titanium (Ti), Nickel (Ni200) and Stainless steel (SS316) coil based wires. The Ohmsmium can fire atomizers with resistances as low as 0.08Ω in temperature mode to accommodate a wide variety of builds. The Ohmsmium utilizes a single, external 18650 battery (not included) and features onboard charging via the USB port with pass-through charging capabilities which allows the user to vape and charge at the same time. Batteries are located behind a threaded battery cover to allow for easy access and features 4 holes for battery ventilation. Many safety features are included in the unit’s design including short circuit protection, low voltage warning as well as a high temperature warning. Product Specifications: Dimensions: 25mm x 81.5mm x 43mm or 0.98″ x 3.21″ x 1.69″ Weight: 248g or 8.75oz (Heavy Duty) Utilizes the GX-80 Chip Constructed from Zinc alloy and stainless steel Curved, ergonomic design makes for an exceptionally comfortable mod Compact chassis allows for portability Amazingly vibrant color designs for a unique look Gold plated 510 connector for maximized conductivity with spring-loaded functionality for easily switching between atomizers Power output: 1.0 - 80.0 watts Temperature range: 200°F to 600°F or 100°C to 300°C Modes: Bypass, Power, Temperature control (Ti/Ni/SS316) Resistance range (Power & TC modes): 0.08Ω-3.0Ω Requires a single 18650 sized battery (not included) Threaded battery cover with ventilation holes Onboard charging as well as Pass-through charging via micro USB Learn More
Position
Set Descending Direction

List Grid

10 per page

Items 1 to 10 of 31 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4